
@step72
290
Following
122
Followers
24
Updates
936
Likes
232
Comments
1824
Votes









70 days ago
Here's my FINAL SUBMISSION
It's been a long and enjoyable journey with you. I'd abandoned this hobby for years because a stroke left me with a tremor in my left hand and impaired my vision... this was the chance to rekindle my old passion!
I'm happy with the final result, and I'd like to review the work and choices I made with you.
I chose the RX78 because for me it's the most iconic model in the series, the one that started it all. I chose not to repaint the model to respect its colors. I opted for light paneling so as not to distort its lines and to respect its design. The choice not to use weathering was dictated by more or less the same principles. I only used a light matte coating to remove the plastic effect.
For the hangar, I first used a Tamiya AS-4 Grey Violet (Luftwaffe), which I thought was particularly suitable. Then I livened it up a bit by adding metallic details in various contrasting colors.
Finding the structure a bit empty, I decided to add another structure, a "bay" for the model inside.
For the lighting, I used:
2 flashing sirens
8 flashing orange LEDs
2 COB LEDs with a tracer effect
16 blue COB LEDs to create a soft light effect
4 blue COB LEDs under the bridge
30 red and blue induction LEDs
32 white LEDs for the ceiling
6 white LEDs and 2 flashing LEDs for the side wall
Finally, I added 8 movable spotlights to vary the lighting angles.
The whole thing was wired to operate with a single switch on a 3V battery pack that manages 7 different lines and 3 USB ports that manage the two inductors and the screen.
The screen was made with an ESP32C6 Dev Kit measuring approximately 58.15mm x 25.40mm which was programmed to display slides with the RX78 projects.
Another gadget included is a smoke generator, hidden behind the bay, stolen from a Lego car.
I included various objects to create the context, some specially printed with a 3D printer, others stolen from other kits, and others, like the containers, created from discarded objects, in this case TicTac boxes.
I painted the miniatures I had purchased specifically for the purpose, but I didn't just place them in the hangar. I tried to create a suitable context for each one, so that the character didn't seem "just there" but rather fit perfectly into the hangar.
This is the final result that I submit to you and the jury.
I especially thank "Bad Evil Guy" whose advice helped me improve the diorama. Sam, Alice, and Francesco, my dwarves, that supported me and offered guidance with their criticism. I thank my good wife, who, despite the lack of space, time, and often energy, didn't clip my wings and allowed me to play with you.
And finally, I thank you for supporting me and keeping me company on this journey…
Au revoir
Step
P.S.
It's a shame that after the attempted hack of the site, the upload limits for the final submission were lowered. To be able to upload a video, I had to reduce the quality to the limit of acceptability.
To whom it may concern the files in higher quality are stored here.
https://drive.google.com/drive/folders/1ZsWllkAyeajV2hmuUwFqUrDP7RGWvRn4?usp=drive_link










72 days ago
FINAL SUBMISSION - It’s the end of the world as we know it (and I feel fine)
Here's my FINAL SUBMISSION
It's been a long and enjoyable journey with you. I'd abandoned this hobby for years because a stroke left me with a tremor in my left hand and impaired my vision... this was the chance to rekindle my old passion!
I'm happy with the final result, and I'd like to review the work and choices I made with you.
I chose the RX78 because for me it's the most iconic model in the series, the one that started it all. I chose not to repaint the model to respect its colors. I opted for light paneling so as not to distort its lines and to respect its design. The choice not to use weathering was dictated by more or less the same principles. I only used a light matte coating to remove the plastic effect.
For the hangar, I first used a Tamiya AS-4 Grey Violet (Luftwaffe), which I thought was particularly suitable. Then I livened it up a bit by adding metallic details in various contrasting colors.
Finding the structure a bit empty, I decided to add another structure, a "bay" for the model inside.
For the lighting, I used:
2 flashing sirens
8 flashing orange LEDs
2 COB LEDs with a tracer effect
16 blue COB LEDs to create a soft light effect
4 blue COB LEDs under the bridge
30 red and blue induction LEDs
32 white LEDs for the ceiling
6 white LEDs and 2 flashing LEDs for the side wall
Finally, I added 8 movable spotlights to vary the lighting angles.
The whole thing was wired to operate with a single switch on a 3V battery pack that manages 7 different lines and 3 USB ports that manage the two inductors and the screen.
The screen was made with an ESP32C6 Dev Kit measuring approximately 58.15mm x 25.40mm which was programmed to display slides with the RX78 projects.
Another gadget included is a smoke generator, hidden behind the bay, stolen from a Lego car.
I included various objects to create the context, some specially printed with a 3D printer, others stolen from other kits, and others, like the containers, created from discarded objects, in this case TicTac boxes.
I painted the miniatures I had purchased specifically for the purpose, but I didn't just place them in the hangar. I tried to create a suitable context for each one, so that the character didn't seem "just there" but rather fit perfectly into the hangar.
This is the final result that I submit to you and the jury.
I especially thank "Bad Evil Guy" whose advice helped me improve the diorama. Sam, Alice, and Francesco, my dwarves, that supported me and offered guidance with their criticism. I thank my good wife, who, despite the lack of space, time, and often energy, didn't clip my wings and allowed me to play with you.
And finally, I thank you for supporting me and keeping me company on this journey…
Au revoir
Step
P.S.
The files in higher quality are stored here.
https://drive.google.com/drive/folders/1ZsWllkAyeajV2hmuUwFqUrDP7RGWvRn4?usp=drive_link










73 days ago
I'm a bit disheartened by what happened. So much energy and passion invested, and in the end, I had reached the top spot on the feed and everything was lost. On top of that, I thought I was being judged by a competent jury, only to find out that everything will be decided by web votes... I mean, whoever has more followers and friends, who maybe don't understand anything about what was done, will win... it all seems so ridiculous to me. Anyway, while I recover the photos for the FINAL SUBMISSION, I'm taking the chance to post some photos that were left out...









82 days ago
Happy Sunday everyone...
Here are some photos with the lights on and everything working.
If all goes well (does it ever happen?), tomorrow a friend will help me take some decent photos so I can post the final submission and finally get back to work.
What do you think? Please, tell me the truth !
I'm very satisfied, and the final result exceeded my expectations!










85 days ago
I fixed a few minor issues and removed a lot of wires because I CONFESS I used hot glue to hold the figures in place. Not my best idea!
This morning I tried to take some detail photos with my phone.
I'm probably a better modeler than a photographer! :D
It's so damn hard to take good photos!
Tonight I'll try to take a video in the dark with all the model lights turned on.
I don't know how much longer this hangar will stand up to my wife's wrath!
...in the meantime, I'm still eagerly peeking into the GP-02 Solomon Physalis box!
88 days ago
This is the other gadget I saved for last.
I added a tiny smoke generator. With the lights on, it's quite impressive.
And that's all for the surprises. All that's left is to try and take some decent photos and maybe a video to show you everything in the best light.
89 days ago
This is the video preview of the first final surprise.
I added a fully functional giant screen displaying the RX78-02 projects.
Turn on the music to fully enjoy it ! ;)










89 days ago
Like many of you, I've reached the final stages.
I've closed the box, applied the last decals, and attached all the characters.
I want to get a proper camera because my cell phone doesn't take the best photos.
I'll leave you a few photos just to show you where I've come, and I hope to post the final ones next week. Thanks to everyone who follow, advised and encouraged me!










93 days ago
I spent all my time adding little details to bring the hangar to life.
I added an elevator under the bridge because my usual COMPLAINING and DISSATISFIED friend said it looked too empty. The magic box helped me with something suitable.
Finally, the characters are free to roam around the base!
For now, everything is in a temporary position but very close to the final version. I'll show you some photos with all the lights off.
My wife is dying to clear the table on the balcony!










98 days ago
I finally managed to test everything out and turn it on at once... so I caused a blackout in the neighborhood. Luckily, with all those lights, no one was left in the dark!!!
I added a photo of the test, but with a small part cropped out to conceal the surprise. I also added another eye-catching gadget.
I focused on adding details with decals and stencils... in fact, you can see that the RX already has 8 Zaku kills under its belt... who knows, maybe it's already taken down Bad Evil Guy's one!!!
I secured all the cables to the back and then had to do some carpentry work to create a box to contain all the tangle of cables under the hangar.
To keep the budget low and to be able to manage the cuts, I used MDF and covered it with some excellent carbon fiber-effect vinyl.
The result exceeded my expectations. All that remains is to join all the sides of the box together.
I decided I needed some "directional lights" to illuminate the model. I had some suitable LEDs that I had bought in the past, but I needed supports to tilt them. I drew them on ABS sheet and then cut them out. Tomorrow I'll color them and add some decals.