
@castrater408
34
Following
77
Followers
21
Updates
375
Likes
60
Comments
3
Votes




68 days ago
Some additional photos in natural light per the recommendation of @antampatz










68 days ago
Earth Mode Optimus Prime by Yolopark is finally done now.
The build is in the same realm as Bandia PGs- lots and lots of detail. Several panels slide/move when articulating and reveal additional levels of details. A mix of good and limited motion. It does not transform, but I personally do not transform model kits when I have the option.
Recapping my version:
The kit typically has issues posing with the weapons single handed. I didn't protect the pegs/holes while painting-which led to some tight assembly; however, Optimus has no problems holding his blaster or ax with either arm outstretched and not sagging. I'm very proud of that.
This kit is also a soft tribute to Peter Cullen as he passed away during the build.
Thank you all for following along on this journey with me.
"I am Optimus Prime, and I send this message so that our past will always be remembered. For in those memories, we live on." - Optimus Prime (Peter Cullen)
68 days ago
A short video of my Final Build (without base as Optimus is too large to rotate in it.









72 days ago
Weapons assembled and painted.
Display base LEDs set and functional.
Optimus Prime teased.
Time for a full photo shoot and then get a final submission in.





72 days ago
Optimus is being assembled.
Weapons have been painted.
Waterslide decals have been applied.
Now just to finish weapon assembly, pose, and photoshoot.
Finished Kit coming soon.






72 days ago
This week, progress was a bit inconsistent.
It’s birthweek in my household as my wife, daughter, and I all had birthdays spread across the week. With various days of family time, I was lucky enough to get the feet completely clipped out and painted.
This week I’ll be doing the gloss coat on the feet, some detail painting, the feet assembly, and the waterslide decals on Optimus’ arms.
With any luck, I’ll be able to snip out the weapons and get them prepped for paint.
Unfortunately, this last week Peter Cullen, the Voice Actor for Optimus Prime, passed away, and as such I will be shifting my kit to a soft tribute build as well.








89 days ago
This week, I was able to get everything for the legs painted except for 2 parts. 2 small parts that sit on the knee were still on the runner when I went to assemble.
The gunmetal came out great, and I was able to add some accenting gold and red to them for pop.
Blue came out exactly how I wanted it to, such a great blue.
The nonmirror chrome parts also came out exactly how I wanted- not overwhelming and you can still see the details on them.
Everything fit together smooth with no issues.
This week, I plan to get the feet snipped out and hopefully painted. I’ll also use this time to get the decals on the arms, if I have the time, and the alligator clips, I’ll also get the weapons prepped.
Coming down to the wire, but a really solid, steady pace.









96 days ago
This week the legs got worked on, with a surprise visit from the hands.
Hands completed. They were a bit tight/snug at first, but working them for a few bends and they felt very smooth.
The legs are about 80% completed now with the last of the leg armor getting prepped for painting. Currently a nice contrast between the gunmetal grey base and the chrome accents. I hope to maintain that as the armor gets painted.
This week will be a focus on detailing the legs, and potentially getting the armor painted. Have some family plans going on so I may not get to the full painting.










102 days ago
This week, I got the frame for both thighs completed and ready for paint along with some of the blue armor bits chrome armor bits.
Leg painting was delayed this week as I was busy with family activities.
However, I was able to take a detour earlier this week and work on the background.
I started with 2 Wonderway LED hangar bases. I didn’t need both bases and Optimus will be taller than 1 wall high so I stacked the walls. After the test fit/light check, I did a quick black primer, white primer highlight, and then threw Gaahleri Diamond White down for the walls, spotlights, and parts of the floor before adding in Gaahleri Track Grey for the elevated platforms. I then topped it off with Mr Weathering Brown and Grey for wear and depth respectively, then a quick semigloss topcoat for sealing and shine. I’m very happy with it.









110 days ago
This week, arms started getting assembled. I finished up spraying the white. It is a fantastic contrast from the red. Exactly what I wanted. It’s Gaahleri Diamond White. Beautiful color. Went on smooth and painless.
After getting subassemblies shaped on the right arm, I was able to do a little bit of detailing, nothing extreme just a touch of color here and there.
The left arm is almost finalized. It’s in its subassemblies, but I need to start the detailing for it.
The hands have not been started yet. They’re all blue hands, so I am waiting to throw them into the next batch of blue painting I will be doing for the legs.
This week, once the detailing is done, I’ll begin the process of getting every leg piece cut out.