Roman Novikov

That's it. The model is built. Thank you for your attention.

I assembled the engine and frame. I installed the glass in the body. Then I assembled the interior, frame, and body. I added the necessary wires and hoses to the engine compartment. During the assembly process, I used weathering to create a realistic feel for the model, so it didn't look like a toy. Finally, I glued all the small parts to the body, and the model is ready! My next post will be a final photo shoot of the finished model.

Took a photo of the engine in better lighting.

I assembled the interior. I laid flock on the floor. I made seat belts from photo-etched parts and 2 mm silk tape.

I assembled the engine and added high-voltage wires to the gearbox using AWD 36 wire.

Moving on. After I finished processing the parts, I washed everything, absolutely every part, with dishwashing liquid. After everything dried, I primed the parts, painted them the base colors, and applied the decals.

First, I prepare all the parts. I remove mold joints, ejector marks, and apply filler where needed. I drill all the necessary holes and glue everything that needs to be glued before painting.