
@antonmatti
5
Following
49
Followers
3
Updates
61
Likes
8
Comments
6
Votes










17 days ago
Some more details of the Laguna ZR1 Racer










17 days ago
This is my finished build based on the MPC 1975 Laguna from the newest release. I have mixed things from different model years to end up with something close to what I would have liked to build in 1:1.
It’s a Resto Mod "Street track attacker" with a full nascar chassis with extensive modifications. Described well by others as a IMSA car for the streets =)
The chassis have a Ford “9 rear axle with a K link setup controlled by 3D printed coilovers. Big Brembo brakes on all for corners color matched to the engine and Interior. Front suspension is a C5R Corvette suspension with coilovers and posable steering rack made out of brass and tubes.
The Power plant is the iconic GM Lotus LT5 which in my imagination built by Katec. The LT5 wich in american terms is exotic have 4 cams and 32 valves got upgraded with ITB’s and modern injection, as well as modern ignition, have seen engines with this setup deliver around 800hp. The engine is paired with a T56 6speed, and the hot gas going through headers and side exiting exhaust.
Interior uses the rear panels from the Monogram nascar and the base of the cage which have been modifyed to fit the Laguna body as I like it. The resin printed dashboard for the 3gen chevelles with the round dials is complemented with a custom center console with armrest, a long short shift stick and some storage for sunglasses. Door cards are from a 1970 Camaro
Body mods include rear flares 2-3inches per side. A extended 1969 Camaro spoiler. Custom hood and nose with a splitter among others.








-800x600.webp)

17 days ago
This started out as a MPC 1975 Laguna molded in white with the 1975 Pollyuruthane nose cone. I have remodeled the nose with parts from the 1973 front and combined the lower part from the 1975 nose to make a more modern look with air ducting.
The rear of the body saw modifications with lights from a 1970 camaro wich resemble what the 1973 Chevelles had. Spoiler is stretched 1969 Camaro piece. The body also got flared around 2mm per side to fit the super wide wheels and tires.
Roling stock is from Tamiya GT2 Porsche but the rear wheels are used in front and the fronts are used in the rear with a deep dish conversion. Rear tires are close to a scale 385 wide tire the front tire is a 285 wide tire.
Chassi was used from an Monogram 1:24 GM Nascar, with the "9 rear axle reconfigurated with K link (sort of 4 link) more like what a Chevelle have.
The front suspension from the Nascar was removed and instead a C5R front crossmember and lower A-arms whas used with the corvette upright. A posable rack an pinion was made to make the wheels turn with a big angle so the car would work great for both drifting and street and track driving.
Big Brembo brakes in all 4 corners color matched with the interior and Engine.
Engine is a LT5 from a 1995 Corvette ZR1, which is a alu engine with 4 cams and 32 valves. With a custom made ITB and modern injection and ignition. Would make around 800hp IRL.
Transmission is a T56 6 speed.
Interior is based of the nascar with a modifyed cage to fit the body and door cards from a 1970 Camaro that got modifyed to fit the cage and look of the Chevelle. The dash is custom made and 3d printed to look like the one i had in my 1:1 1977 chevelle with round gauges.
Custom center console with manual stick and storage. Note the glasses ;)
Seats are custom Recaro seats, much like the ones i had in my 1999 Camaro, with full seatbelts.
Details can be found all around wiht keys and such.