GWCC Online
Sign Up
Anton MM cover image

Anton MM

@antonmatti

Auto

5

Following

49

Followers

3

Updates

61

Likes

8

Comments

6

Votes

1973 Chevrolet Chevelle Laguna ZR1 1
1973 Chevrolet Chevelle Laguna ZR1 2
1973 Chevrolet Chevelle Laguna ZR1 4
1973 Chevrolet Chevelle Laguna ZR1 5
1973 Chevrolet Chevelle Laguna ZR1 6
1973 Chevrolet Chevelle Laguna ZR1 7
1973 Chevrolet Chevelle Laguna ZR1 9
1973 Chevrolet Chevelle Laguna ZR1 10
1973 Chevrolet Chevelle Laguna ZR1 1
1973 Chevrolet Chevelle Laguna ZR1 2
Auto

17 days ago

1973 Chevrolet Chevelle Laguna ZR1

This started out as a MPC 1975 Laguna molded in white with the 1975 Pollyuruthane nose cone. I have remodeled the nose with parts from the 1973 front and combined the lower part from the 1975 nose to make a more modern look with air ducting.

The rear of the body saw modifications with lights from a 1970 camaro wich resemble what the 1973 Chevelles had. Spoiler is stretched 1969 Camaro piece. The body also got flared around 2mm per side to fit the super wide wheels and tires.


Roling stock is from Tamiya GT2 Porsche but the rear wheels are used in front and the fronts are used in the rear with a deep dish conversion. Rear tires are close to a scale 385 wide tire the front tire is a 285 wide tire.


Chassi was used from an Monogram 1:24 GM Nascar, with the "9 rear axle reconfigurated with K link (sort of 4 link) more like what a Chevelle have.

The front suspension from the Nascar was removed and instead a C5R front crossmember and lower A-arms whas used with the corvette upright. A posable rack an pinion was made to make the wheels turn with a big angle so the car would work great for both drifting and street and track driving.

Big Brembo brakes in all 4 corners color matched with the interior and Engine.


Engine is a LT5 from a 1995 Corvette ZR1, which is a alu engine with 4 cams and 32 valves. With a custom made ITB and modern injection and ignition. Would make around 800hp IRL.


Transmission is a T56 6 speed.


Interior is based of the nascar with a modifyed cage to fit the body and door cards from a 1970 Camaro that got modifyed to fit the cage and look of the Chevelle. The dash is custom made and 3d printed to look like the one i had in my 1:1 1977 chevelle with round gauges.

Custom center console with manual stick and storage. Note the glasses ;)

Seats are custom Recaro seats, much like the ones i had in my 1999 Camaro, with full seatbelts.

Details can be found all around wiht keys and such.


Followers