
_modelowy_start_pl
@modelowystartpl
105
Following
105
Followers
27
Updates
825
Likes
154
Comments
78
Votes


131 days ago
Update: Detailing Experiments & Upcoming Turret Repair
July 12, 2026. Over the past week, I experimented with adding a small detail to improve the realism of the build. While researching reference photos, I noticed that real K2 tanks have thin retaining cables attached to the smoke grenade launcher caps. I decided to scratch-build this feature using Tamiya CA Cement (Quick Type). My first attempt used miniature chains inspired by an aftermarket set, but further research showed they weren't accurate. I then tried standard wire, but bending it left it looking damaged. A tiny piece of string was my next idea, but I quickly removed it because the fabric texture would likely look fuzzy under paint. After several failed attempts, I finally found the perfect solution: 0.2mm lead wire. It was easy to work with and looked perfectly in scale. Unfortunately, all the trial and error on the first turret cheek caused significant damage. The smoke grenade launchers lost their shape after being heavily bonded with Tamiya Extra Thin Cement, and CA glue seeped into the plastic, causing further damage. Trying to remove the damaged section only made things worse, chewing up the lower part of the turret. With no way to save it, I cut away the lower section of the turret cheek. As a backup plan, I ordered a second K2 kit as a donor. Thankfully, it has now arrived. My plan is to carefully cut the matching section from the donor kit, fit it into the main build, and rebuild the turret cheek with a fresh set of smoke grenade launchers. The rest of the donor kit will be kept for future projects.
- AQ
Arvin Quezada130 days agoNice
- _
