
Dutch Dave Model Bench
@dutchdavemodelbench
118
Following
106
Followers
25
Updates
559
Likes
79
Comments
6
Votes
100 days ago
Building Blog No. 15: The Lifting Crane – Further developments 🏗️
Hi fellow modelers,
Welcome to building blog number 15 of my Alan 1/35 Panzer I conversion. Last time, the outer shape of the scratch-built lifting crane reached its final form. It now perfectly follows the blueprints. Today, we are adding strength and detail to the structure. The focus is on the inside support and the outside connections.
Positioning the Internal L-Beams
A real crane needs to carry heavy loads. Therefore, I started working on the inside of the main structure. According to the technical drawings, heavy support beams reinforce this area.
- I used thin plastic strips shaped like an L (Evergreen L-beams).
- I cut each piece to the exact length for the interior.
- Using liquid plastic cement, I fixed the L-beams into the corners.
- This instantly gives the crane the correct, realistic depth and structural strength.
Fixing the Half-Round Connecting Plates
With the inside firmly supported, it was time to dress up the exterior. On the real vehicle, heavy, half-round connecting plates hold the corners and joints of the crane together.
- I scratch-built these plates from thin plasticard sheet.
- I traced the exact half-round shape using the blueprint as a guide.
- I carefully glued these plates onto the outsides of the structure.
- They fit perfectly over the joints, just like on the actual historical crane.
Next Steps
The main body of the crane is now complete and sturdy. The basic shapes are all done. Now, it is time for the fine details that will truly bring this model to life. In the next update, I will add some weld seams and the dozens of rivets onto these connecting plates.
Until the next update!
- DD
Dutch Dave Model Bench96 days agoI am happy with the result
- J
john_n_porter100 days agoThis some scratch building done here…..
- DD

- SM
SQ Model Maker100 days agoA lot time spent here